Chief Librarian Lucius Orzora

I decided to take advantage of the bout of warm-ish weather Toronto is experiencing and get my Terminator Librarian assembled, based, and primed. He will be Lucius Orzora, Chief Librarian of the Revilers Chapter and leader of my 1250 point Planetstrike Attacker list for the tourney on the 29th.

I bulked up his base with some cork chunks; mainly to make him a bit more impressive than the Space Hulk librarian that he may have to share the board with sometime. He is supposed to be the Chief Librarian, after all - and it wouldn't do to have some Terminator-armoured Epistolary looking more impressive than him.

Here he is, primed grey and all ready for me to... start painting something else. I'll probably get around to starting on this guy (and finishing up my power-armoured Librarian) on the weekend.

Magnetizing Space Hulk Termies - and some changes...

Howdy, folks, I'm back... in the midst of a busy grade 12 year, I've once again found time to devote to my beloved hobby. First off - a few changes 'round the blog. Having noticed that my hobby adventures have a tendency to turn magnetic, I've renamed the blog Magnet Addict - because I do love me some magnets. Preferably the rare-earth kind. I've also gotten bored of the rather plain "The Workbench". The blog can now be reached at http://magnetaddict.blogspot.com. And now, to the post! More fun with magnets - and Space Hulk Terminators!

So, a friend of mine and I split the Space Hulk box back in September when it was released - I got the Termies, and am currently holding on to the floor tiles and counters, he got the Genestealers. Now, I was just as excited at the prospect of including these beautiful Terminators in my Revilers army - so I promptly filed off all the obvious Blood Angels insignia. This, however, left me with the problem of basing. Simply gluing them to 40mm bases wouldn't do, because then they wouldn't fit next to each other on the Space Hulk board. My solution was to take two small rare earth magnets and put one in the terminator, and one in a blank 40mm base - like so.



This allows me to have them legally based for 40k, as well as maintaining the ease of movement for Space Hulk. The magnets fit flush to each other, and hold on well enough to stand up to the rigours of tabletop play.



That's one down - now I have the other eleven to base, and paint. They'll join the rest of my Revilers on the painting table. I hope to get most (if not all!) of them finished for the 28-29 of November, when my local(ish) GW is running a 500+ point escalation tournament, and a 1250 pt Planetstrike tourney - with a Fortress of Redemption up for grabs! So, back to painting - Tactical marines, Devastators, and a Termie Librarian... or two...

Until next time.

Heavy Weapon Team Bases - Step by Step

With the advent of the new Imperial Guard codex, Heavy Weapon teams are now a single two-wound model mounted on a 60mm round base. Since the standard giant tripod-mounted heavy weapons don't really fit in with the "light infantry" theme of my 157th Aeshaettar, I plan to convert man-portable versions from Space Marine Devastator heavy weapons. This means that my gunners and loaders can both be mounted on 25mm bases for ease of storage and transport. But how, then, would I mount them on a 60mm base to make them codex-legal?
Using this:




It's an Infantry movement tray for War of the Ring... with conveniently shaped depressions for infantry based on 25mm bases. Since I only need 2 models to fit on each base, I cut the movement tray into conveniently sized sections. Like so:






I then trimmed it to fit within the perimeter of a 60mm round base, and cut a corresponding hole in the base.






The section of movement tray was then glued into the middle. I'll fill any unsightly gaps with greenstuff later.



A view from the side... it's perfectly flat, so my support troopers will stand at the same height as my other Guardsmen.



And finally, for illustrative purposes, two of my Revilers pretending to be a Heavy Weapons team. This shows how the models fit into the tray, allowing me to remove them for transport or remove the loader to track wounds.



Now I just have to make 14 more.